Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-1650002.png)
6. Remove 2 nuts securing each roof bar to roof.
7. Remove roof bars and collect foam pads from each end.
Refit
1. Fit roof bars to roof, ensuring foam pads are correctly located.
2. Fit nuts securing roof bars to roof and tighten to 32 Nm (24 lbf.ft).
3. Models with rear A/C: Fit upper side ducts and secure with rivets.
4. Models with rear A/C: Fit rear centre duct and secure with rivets.
5. Fit headlining.
