Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-1690011.png)
16.
Verify that the seat pad fabric is not trapped between the seat hook and seat frame.
17.
Tighten bolt "A" to 25 Nm (18 lbf.ft). (Figure 23)
18.
Connect the seat hook spring and the return spring to the seat frame.
19.
Install and secure the seat fabric.
20.
Install and secure the seat finisher.
21.
Refer to RAVE section 78.10.45 and install the 3rd row occasional rear seat.
