Land Rover Workshop Service and Repair Manuals

Brake Pad: Specifications
General Specifications

Brake Pad

Brake Pad Specifications

Front & Rear 

Minimum thickness: ................................................................................................................................................................................. 2.0 mm (0.08 in)

Brake Rotor/Disc

Brake Rotor Specifications

Front 

Diameter: ............................................................................................................................................................... 297.0 - 297.4 mm (11.693 - 11.709 in)
Minimum thickness

New: ......................................................................................................................................................................... 24.9 - 25.1 mm (0.980 - 0.988 in)
Service limit: .................................................................................................................................................................................. 22.0 mm (0.866 in)

Maximum disc runout: .......................................................................................................................................................................... 0.15 mm (0.006 in)

Rear 

Diameter: ............................................................................................................................................................... 303.8 - 304.2 mm (11.961 - 11.976 in)
Minimum thickness

New: ......................................................................................................................................................................... 12.5 - 12.7 mm (0.492 - 0.500 in)
Service limit: .................................................................................................................................................................................. 11.7 mm (0.461 in)

Maximum disc runout: .......................................................................................................................................................................... 0.15 mm (0.006 in)