Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-1745001.png)
Cruise Control Module: Service and Repair
Vacuum Control Unit
Vacuum Control Unit - Up to 03MY
Remove
1. Disconnect vacuum hose from actuator.
2. Disconnect multiplug from vacuum control unit
3. Release 3 rubber mountings securing control unit, and remove from mounting bracket.
4. Remove vacuum hose from control unit.
Refit
1. Position vacuum hose to control unit.
2. Position control unit and secure mountings.
3. Connect multiplug and vacuum hose.
Vacuum Control Unit - From 03MY
Remove
