Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-440002.png)
2.
Refer to Global Technical Reference (GTR), section 12.60.04 and remove the oil filter.
3.
Remove the four bolts securing the oil filter head adapter.
4.
Remove the adapter and 0-ring.
5.
Lubricate and install a new 0-ring (ERR7308) to a new oil filter head adapter (LYP000011).
6.
Position the new oil filter head adapter to the engine front cover.
7.
Install and tighten bolts to 8 Nm (5.9 lbf/ft).
8.
Install the oil filter following GTR procedure.
9.
Top up the engine oil as required.
