Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-484002.png)
6. Remove 2 bolts securing alternator and remove alternator.
7. Remove 3 bolts securing Power Assisted Steering (PAS) pump pulley and remove pulley.
8. Remove jockey pulley.
9. Position tray to catch spillage, release PAS pump high pressure pipe.
CAUTION: Always fit plugs to open connections to prevent contamination.
10. Remove bolt securing oil cooling pipe and release bracket from auxiliary housing.
11. Remove two bolts securing PAS pump.
12. Remove 5 bolts and one nut securing auxiliary housing. Pull housing forward, release PAS pump and remove housing.
