Discovery II (LT) V8-4.6L (2003)
Air Door Actuator / Motor: Service and Repair
Servo - Air Distribution Control
Servo - Air Distribution Control
Service Repair No - 80.10.30
Remove
1. Disconnect battery earth lead.
2. RHD models: Remove heater assembly.
3. LHD models: Remove heater motor assembly.
4. Release clip securing operating lever and release the lever from linkage.
5. Remove 3 screws securing servo support bracket to casing and release servo.
6. Disconnect multiplug from servo and remove servo.
7. Release clip securing operating lever to servo and remove lever.
8. Remove 2 screws securing support bracket and remove support bracket.
Refit
1. Position support bracket to servo and secure with screws.
2. Position servo lever to servo and secure clip.
3. Connect multiplug to servo.
4. Position servo to casing and secure with screws.
5. Connect operating lever to servo and secure with clip.
6. RHD models: Fit heater assembly.
7. LHD models: Fit heater motor assembly.
8. Connect battery earth lead.