Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-1427002.png)
8. Remove 3 remaining bolts securing cooling fan support rails to condenser.
9. Remove condenser.
10. Remove bolt securing adaptor block to receiver drier.
11. Remove adaptor block from receiver drier and discard '0' ring.
CAUTION: Always fit plugs to open connections to prevent contamination.
12. Remove bolt securing condenser pipe to receiver drier.
13. Remove clamp bolt receiver drier to bracket and remove drier from bracket.
14. Remove and discard '0' ring from condenser pipe.
CAUTION: Always fit plugs to open connections to prevent contamination.
