Discovery II (LT) V8-4.6L (2003)
Evaporative Emission Control Canister: Service and Repair
Canister - EVAP - Models With Fuel Leak Detection Pump - From MY 2003
Canister - EVAP - Models With Fuel Leak Detection Pump - From 03MY
Service Repair No - 17.15.13
Remove
1. Raise the vehicle on lift.
2. Disconnect multiplug from the fuel leak detection pump.
3. Disconnect the fuel leak detection filter pipe from the fuel leak detection pump.
4. Release clips and disconnect 2 vent pipes from the EVAP canister.
CAUTION: Always fit plugs to open connections to prevent contamination.
5. Remove and discard 4 bolts securing EVAP canister mounting bracket to the chassis and remove the EVAP canister assembly.
NOTE: Do not carry out further dismantling if component is removed for access only.