Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-770002.png)
CAUTION: Always fit plugs to open connections to prevent contamination.
6. Remove and discard clip securing EVAP pipe to the fuel leak detection pump and disconnect the pipe.
7. Remove the fuel leak detection pump.
Refit
1. Connect the EVAP pipe to the fuel leak detection pump and secure with a new clip.
2. Connect the fuel leak detection filter pipe to the fuel leak detection pump.
3. Remove absorbent cloth.
4. Fit and tighten 3 screws securing the fuel leak detection pump to the chassis mounting bracket.
5. Connect multiplug to the fuel leak detection pump.
6. Lower the vehicle lift.
