Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-804001.png)
Fuel Filler Neck: Service and Repair
Filler Tube - Fuel
Service Repair No - 19.55.07
Remove
1. Raise rear of vehicle.
WARNING: Do not work on or under a vehicle supported only by a lack. Always support the vehicle on safety stands
2. Ensure fuel tank is less than half full. If not, drain fuel tank to less than half full.
3. Remove filler cap.
4. Drill out rivet securing lower part of mud flap support bracket and release bracket
5. All except NAS models: Disconnect filler hose, breather hose and vent pipe from filler tube.
6. NAS models: Loosen securing clip and release filler tube from fuel tank.
7. NAS models: Disconnect vent pipes from filler tube.
8. Release filler tube from grommet in body and remove from under rear wing. Collect grommet.
