Discovery II (LT) V8-4.6L (2003)
Fluid - A/T: Testing and Inspection
-
Fill gearbox with recommended oil to bottom of oil level/filler plug hole.
^
Select 'P' (Park).
^
Ensure hand brake is applied.
^
Start engine and allow it to idle.
^
Apply foot brake.
^
Move selector lever through all gear positions, select 'P' (Park).
^
With engine idling, continue filling gearbox until oil runs from oil filler/level plug hole.
^
Stop engine.
^
Fit new sealing washer to automatic gearbox filler/level plug, fit plug and tighten to 30 Nm (22 lbs.ft).
^
Remove all traces of oil from gearbox casing.