Discovery II (LT) V8-4.6L (2003)
Intermediate Plate: Service and Repair
Intermediate Plate
Service Repair No - 44.17.20
Remove
1. Remove intermediate plate gasket.
2. Remove selective thrust washer from intermediate plate.
3. Remove 2 M14 Allen plugs from intermediate plate, remove and discard sealing washers.
4. Remove 2 M20 plugs from intermediate plate, remove and discard sealing washers.
5. Remove 2 oil cooler pipe adaptors from intermediate plate.
6. Remove 8 bolts securing fluid pump to intermediate plate and carefully remove pump from intermediate plate.
7. Note position and remove pump locating dowel.
8. Remove and discard 'O' ring from pump housing.