Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-989001.png)
Bell Housing: Service and Repair
Housing - Clutch
Service Repair No - 37.12.07
Disassembly
1. Remove clutch release bearing and operating lever.
2. Remove 6 bolts and remove clutch housing.
Reassembly
1. Clean clutch housing and gearbox mating face.
2. Position clutch housing and tighten bolts to 75 Nm (55 ft. lbs.).
3. Fit clutch operating lever and release bearing.
