Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-999001.png)
Output Shaft: Service and Repair
Shaft - Output
Service Repair No - 37.20.25
Disassembly
1. Remove gearbox selector fork - set
2. Remove gearbox front cover.
3. Remove and discard oil seal and bearing tracks from front cover.
4. Remove and discard bearing tracks from centre plate, collect selective shims.
5. Using tool LRT-99-002 and support bars under 1st gear, press output shaft bearing from output shaft.
