Discovery II (LT) V8-4.6L (2003)
/v8-4.6l/Page-1034003.png)
7. Fit high range gear and bush onto shaft.
8. Fit rear bearing using tool LRT-41-008.
9. Fit new bearing retaining nut and using tool LRT-41-007, tighten to 72 Nm (53 lbf.ft).
10. Using a suitable drift, stake collar of nut into differential shaft recess.
11. Fit high/low selector shaft detent ball and spring.
12. Apply Loctite 290 sealant to threads of detent plug.
13. Fit and tighten plug, then loosen 2 complete turns.
14. Fit differential.
