Freelander Service Procedures
DOORS
REPAIRS
76-1-3
REPAIRS
Door assembly - front - remove for
access & refit
$% 76.28.01.99
Remove
1. Remove scrivet and 5 Torx screws securing
front carpet retainer and remove carpet
retainer.
2. Release and disconnect multiplugs from lower
'A' post.
3. Release harness sheath from 'A' post and pull
door harness through 'A' post.
4. Remove roll pin from door check strap, and
release check strap from ' A' post.
5. Discard roll pin.
6. Remove 2 'C' clips from door hinges.
7. With assistance raise and remove door.
Refit
1. With assistance position door to hinges.
2. Fit 'C' clips to hinge pins.
3. Position check strap to 'A' post and secure with
new roll pin.
4. Feed door harness through 'A' post and secure
harness sheath.
5. Connect and secure multiplugs at lower 'A'
post.
6. Fit carpet retainer and secure with Torx screws
and scrivet.
7. Check door alignment.
