Freelander Service Procedures
GENERAL DATA
04-18
Fuel system - K1.8 Petrol
Different octane ratings (98 RON) may be defined nationally; 90 — 98 RON if re-tuned via Testbook/T4 programme.
Leaded specifications will be available in certain markets. Alternative fuel specification (23% ethanol) is available in
certain markets.
Fuel system - KV6 Petrol
Different octane ratings (98 RON) may be defined nationally; 90 - 98 RON if re-tuned via Testbook/T4 programme.
Leaded specifications will be available in certain markets. Alternative fuel specification (23% ethanol) is available in
certain markets.
System
Returnless multi-point fuel injection electronically controlled by
Motorola MEMS 3, ECM, with electro-mechanical fuel injectors
Fuel specification
EN228, 95 unleaded*
Fuel rail
Single nylon moulding with integral pressure damper
Injectors
4 x Bosch EV6E - MYJ 100550; air assisted, split stream targeted onto
back of inlet valves
Injector flow rate
117 g/min. @ 300 kPa (3.0 bar, 43.5 lbf.in
2
)
Fuel pump
Continuous flow, electrically driven roller vane pump submerged in
fuel tank
Fuel pressures
3.5 bar, 50.7 lbf.in
2
)
Fuel pressure regulation
Controlled by in-tank pressure regulator
Fuel pump delivery
39 litres @ 300 kPa (43.5 lbf.in
2
)
Fuel filter
In-tank, lifetime fit, Mesh area 584 cm
2
; Mesh size 8 to 10 microns
Air cleaner
Mann & Hummel paper element type
System:
⇒
Up to 03 MY
⇒
From 03 MY
Multi-port, air assisted injection from pressure regulated, returnless supply
controlled by Siemens ECM and electro-mechanical injectors
Multi-port injection from pressure regulated, returnless supply controlled by
Siemens ECM and electro-mechanical injectors
Fuel specification
EN228 95 RON unleaded*
Fuel rail:
⇒
Non NAS
⇒
NAS
2 x nylon mouldings joined by steel crossover tube, pressure regulator on RH rail
Circular stainless steel returnless fuel rails with a nylon, multi-layer link pipe
Injectors:
⇒
Up to 03 MY
⇒
From 03 MY
6 x air assisted, with twin sprays targeted on to back of inlet valves
6 with quadruple sprays targeted on to back of inlet valves
Injector flow rate
152 g/min. @ 350 kPa (3.5 bar, 50.7 lbf.in
2
)
Injector air flow rate
1.0 kg/hour
Fuel pump
Electric submersible
Fuel pressures
350 kPa (3.5 bar, 54.7 lbf.in
2
)
Air filter
Paper element type
