Freelander Service Procedures
GENERAL DATA
04-26
Rear Axle and Final Drive
Rear Axle
Type
Hypoid gear, centreline of drive pinion below centre of ring gear
Differential carrier material
Aluminium
Ring gear to Pinion gear backlash tolerance
0.13 to 0.20 mm (0.005 - 0.008 in)
Propeller shaft to rear driveshaft ratio
3.214 : 1
Final Drive
Ratios:
⇒
Td4 engine with manual gearbox
3.182 : 1
⇒
Td4 engine with automatic gearbox
2.91 : 1
⇒
K1.8 engine
4.200 : 1
⇒
KV6 engine
3.66 : 1
Hill Descent Control (HDC) speeds:
Minimum forward
9.6 km/h (6.0 mph)
Minimum reverse
6.5 km/h (4.0 mph)
Viscous coupling
Rating:
⇒
Max
440 Nm (325 lbf.ft) @ 75 rpm
⇒
Min
360 Nm (265 lbf.ft) @ 75 rpm
