Freelander Service Procedures
HEATING AND VENTILATION
REPAIRS
80-19
11. Release clip securing air intake hose to FBH,
release clamp from exhaust manifold.
12. Remove 2 bolts securing air intake and exhaust
assembly to FBH and move aside.
Refit
1. Fit exhaust pipe, air intake hose and bracket
assembly to FBH.
2. Fit and tighten bolts to 10 Nm (7.5 lbf.ft).
3. Tighten exhaust pipe clamp to 5 Nm (3.5 lbf.ft).
4. Align air intake hose with mark on casing and
secure with clip.
5. Fit mounting bracket to FBH and tighten bolts to
10 Nm (7.5 lbf.ft).
6. Connect multiplugs to FBH.
7. Fit FBH to body, tighten bolts to 10 Nm (7.5
lbf.ft).
8. Fit coolant hoses to FBH and secure with clips.
9. Fit fuel feed hose to FBH and secure with clip.
10. Refill cooling system.
ADJUSTMENTS, Coolant - drain and refill.
11. Fit front bumper.
Bumper - assembly - front - up to 04MY.
12. Connect battery earth lead.
Sensor - outside temperature (OT)
$% 80.40.31
Remove
1. Remove front bumper.
Bumper - assembly - front - up to 04MY.
2. Disconnect multiplug from OT sensor.
3. Remove OT sensor from mounting bracket,
collect rubber washer and spacer.
Refit
1. Clean OT mounting bracket and sensor.
2. Fit OT sensor to mounting bracket, fit rubber
washer and spacer, connect multiplug.
3. Fit front bumper.
