Freelander Service Procedures
HOOD
REPAIRS
76-7-3
6. Push canvas forward and secure clips in bars.
7. Wrap up tonneau and secure in place.
8. Release and remove hinge pins, release
tension bars.
9. Loosen header clamp bolts and release header
clamps.
10. Remove soft back assembly.
Refit
1. Position soft back assembly, secure in header
clamps.
2. Tighten header clamps.
3. Align tension bars and fit hinge pins.
4. Release tonneau from securing tie.
5. Release clips in bars and pull canvas to the
rear.
6. Secure tail door frame lock in lock bars.
7. Secure 'E' post fabric in position.
8. Tension side bars.
9. Position tonneau cover.
10. Fit side screens, secure zips and press studs
and position Velcro covers.
