Freelander Service Procedures
MANIFOLDS & EXHAUST SYSTEMS - K SERIES KV6
REPAIRS 30-3-11
Gasket - exhaust manifold - LH - Non
NAS
$% 30.15.17
Remove
1. Disconnect battery earth lead.
2. Remove engine acoustic cover.
ENGINE - K SERIES KV6, REPAIRS,
3. Release HO2S multiplug from support bracket
on LH camshaft cover, disconnect multiplug.
4. Raise vehicle on ramp.
5. Remove underbelly panel.
6. Remove 2 nuts securing front exhaust pipe to
manifold flange.
7. Lower vehicle on ramp.
8. Release HO2S lead from clip on cylinder block.
Remove 4 nuts securing exhaust manifold to
cylinder head, remove manifold and discard
gasket.
Refit
1. Clean exhaust manifold and mating face on
cylinder head.
2. Fit new exhaust manifold gasket to cylinder
head.
3. Position exhaust manifold to cylinder head, fit
and tighten nuts to 45 Nm (33 lbf.ft).
4. Raise vehicle on ramp.
5. Position LH exhaust manifold flange to front
pipe, fit and tighten nuts to 50 Nm (37 lbf.ft).
6. Secure HO2S lead in clip on cylinder block.
7. Fit underbelly panel.
8. Lower vehicle on ramp.
9. Connect HO2S multiplug and secure to support
bracket.
10. Fit engine acoustic cover.
ENGINE - K SERIES KV6, REPAIRS,
11. Connect battery earth lead.