Freelander Service Procedures
MANIFOLDS & EXHAUST SYSTEMS - K SERIES KV6
REPAIRS
30-3-9
Gasket - exhaust manifold - RH - Non
NAS
$% 30.15.16
Remove
1. Disconnect battery earth lead.
2. Release RH HO2S multiplug from coolant rail
bracket and disconnect multiplug.
3. Remove bolt securing upper RH engine steady
to top arm.
4. Loosen bolt securing upper RH engine steady
to body, pivot engine steady away from top
arm.
5. Raise vehicle on a ramp.
6. Remove underbelly panel.
7. Remove exhaust front pipe.
- K SERIES KV6, REPAIRS, Front pipe - Non
NAS.
8. Remove bolt securing lower engine steady to
sump mounting bracket.
9. Loosen bolt securing lower engine steady to
subframe, pivot steady away from sump
mounting bracket.
10. Remove cable tie and release gear selector
cable from clip on body.
11. Remove 2 bolts securing IRD heat shield to
lower engine steady mounting bracket.
12. Remove nut securing heat shield to IRD pinion
housing.
13. Remove nut securing heat shield to IRD
housing and remove heat shield.
M30 0996
M12 6597
