Freelander Service Procedures
MANIFOLDS & EXHAUST SYSTEMS - K SERIES KV6
30-3-8
REPAIRS
Gasket - inlet manifold - LH
$% 30.15.08
Remove
1. Disconnect battery earth lead.
2. Drain cooling system.
COOLING SYSTEM - K SERIES KV6,
ADJUSTMENTS, Coolant - drain and refill.
3. Remove fuel rail.
PETROL, REPAIRS, Fuel rail - KV6 - Non
NAS.
PETROL, REPAIRS, Fuel rail - KV6 - NAS.
4. Depress locking collar and release breather
hose from LH inlet manifold.
5. Release clip and disconnect coolant hose from
LH inlet manifold.
6. Progressively loosen and remove 7 bolts
securing LH inlet manifold to cylinder head.
7. Remove inlet manifold and discard gasket.
Refit
1. Clean inlet manifold and cylinder head mating
faces.
2. Fit new inlet manifold gasket to cylinder head,
position inlet manifold, fit and tighten bolts to 25
Nm (18 lbf.ft).
3. Connect breather hose to LH inlet manifold.
4. Connect coolant hose to inlet manifold and
secure clip.
5. Fit fuel rail.
PETROL, REPAIRS, Fuel rail - KV6 - Non
NAS.
PETROL, REPAIRS, Fuel rail - KV6 - NAS.
6. Fill cooling system.
COOLING SYSTEM - K SERIES KV6,
ADJUSTMENTS, Coolant - drain and refill.
7. Connect battery earth lead.