Freelander Service Procedures
MANIFOLDS & EXHAUST SYSTEMS - K SERIES KV6
REPAIRS
30-3-5
Intermediate pipe - NAS
$% 30.10.11
Remove
1. Raise vehicle on 4 post ramp.
2. Remove tail pipe and silencer.
- K SERIES KV6, REPAIRS, Tail pipe &
silencer.
3. Remove 2 nuts securing intermediate pipe to
front pipe.
4. Loosen nut securing intermediate pipe clamp to
catalyst.
5. Release intermediate pipe from mounting.
6. Release and remove intermediate pipe.
7. Remove and discard gasket.
Refit
1. Clean intermediate pipe and mating faces.
2. Fit new gasket to front pipe flange.
3. Fit intermediate pipe and connect mounting.
4. Tighten intermediate pipe flange nuts to 60 Nm
(44 lbf.ft).
5. Tighten clamp nut to 55 Nm (40 lbf.ft).
6. Fit tail pipe and silencer.
- K SERIES KV6, REPAIRS, Tail pipe &
silencer.
7. Lower vehicle.
