Freelander Service Procedures
TORQUE WRENCH SETTINGS
06-10
Engine Management System – MEMS
+ Apply sealant, Part No. STC 50552 to threads
TORQUE DESCRIPTION
METRIC
IMPERIAL
Camshaft position (CMP) sensor bolt
8 Nm
6 lbf.ft
Crankshaft position sensor (CKP) to housing bolt
8 Nm
6 lbf.ft
'E' box retaining clip nut
9 Nm
7 lbf.ft
Engine coolant temperature (ECT) sensor to housing bolt
*
15 Nm
11 lbf.ft
Fuel cut-off (inertia) switch nuts
2 Nm
1.5 lbf.ft
Idle air control (IAC) valve to manifold Torx screws
1.5 Nm
1.1 lbf.ft
Ignition coil and ht lead cover bolts
10 Nm
7.5 lbf.ft
Ignition coil mounting bolts
8 Nm
6 lbf.ft
Spark plugs to cylinder head
27 Nm
20 lbf.ft
Throttle body to inlet manifold chamber Torx screws (KV6)
7 Nm
5 lbf.ft
Throttle actuator support bracket to throttle body Torx screws
(vehicles with cruise control only)
9 Nm
7 lbf.ft
Throttle position sensor to housing Torx screws
1.5 Nm
1.1 lbf.ft