Freelander (LN) V6-2.5L (2004)
13. Release squab lock warning button escutcheon.
14. Remove squab cover and pad from frame.
15. Remove and discard 12 hog rings and remove cover from pad.
Refit
1. Position squab cover to pad and secure hog rings.
2. Fit squab cover and pad to frame.
3. Fit head restraint guide tubes and seat lock warning button escutcheon.
4. Fit cover to sides and bottom of frame.
5. Fit cover to rear of frame and seat belt aperture.
6. Position latch escutcheon to back cloth and fit to frame. Ensure that the latch escutcheon is secured correctly into latch housing.
7. Fit cover to arm rest aperture.
8. Fit arm rest and tighten screws.
9. Fit arm rest aperture trim.
10. Fit head restraints.
11. Fit cushion to squab and tighten Torx bolts.
12. Fit side covers and tighten screws.
13. Position seat belt reel in seat squab and tighten nut to 32 Nm (24 lbf.ft).
14. Fit seat belt reel cover and tighten screws.
15. Secure rear seat in locked position.
Cover - Squab - Rear Seat - Side - LH