Freelander (LN) V6-2.5L (2004)
10. Remove and discard 9 hog rings and remove cover from pad.
Refit
1. Position latch escutcheon to back cloth and fit to frame. Ensure that the latch escutcheon is secured correctly into latch housing.
2. Position squab cover to pad and secure hog rings.
3. Fit squab cover and pad to frame.
4. Fit head restraint guide tubes.
5. Fit cover to sides and bottom of frame.
6. Fit cover to rear of frame.
7. Fit head restraint.
8. Fit cushion to squab and tighten Torx bolts to 28 Nm (21 lbf.ft).
9. Fit side covers and tighten screws.
10. Secure rear seat in locked position.
Cover - Squab - Rear Single Seat - 3 Door
78.90.85 Cover - Squab - Rear Single Seat - 3 Door
Remove
1. Remove rear seat assembly.
2. Remove 2 screws securing console cover and remove cover.