Freelander (LN) V6-2.5L (2004)
/v6-2.5l/Page-521002.png)
11. Remove 3 nuts and 3 bolts securing ignition coils to LH inlet manifold and release coil earth lead.
12. Remove ignition coils and position aside.
13. Release clip and disconnect coolant bleed hose from RH inlet manifold, position hose aside.
14. Release injector harness clips from injector protection cover.
Protection covers are NOT fitted to NAS vehicles.
15. Remove 2 bolts securing protection cover and RH fuel rail to RH inlet manifold, remove cover.
