Freelander (LN) V6-2.5L (2004)
13.
Position air intake pipe and secure with clip.
14.
Connect connector to throttle body.
15.
Connect the connectors to the IAT and MAF sensors.
16.
Align the harness and the fuel supply pipe and secure both in the clip on the intake manifold chamber.
17.
Connect the connector to the purge control valve.
CAUTION:
Blanking plugs must be removed before component is installed.
18.
Connect the fuel hose to the fuel rail pipe and install the rubber sleeve over the hose connector.
19.
Secure the vacuum enhancer to the intake manifold chamber.
20.
Install the engine acoustic cover.
21.
Connect the battery ground lead.