landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Head, Side and Tail Lamps - USA|Page 6290 > < Head, Side and Tail Lamps - USA
Page 2
background image

Fuse 34 (C0587) provides a feed to the LH main beam bulb (C0009) on a US wire. The bulb (C0009) is earthed on a B wire.

Headlamp Flash

When the LH column switch is pulled back (but not past) spring pressure, the headlamps operate in exactly the same way as described in the   Main
Beam   section until the switch is released.

CCU

When the lighting switch is turned to the main beam position, current flows across the switch (C0041) to the CCU (C0428) on an OU wire. The CCU
also monitors the condition of the driver door switch (C0441) on a PS then PW wire, and the ignition switch. If the driver door switch is closed and the
ignition switch in the 'off' position, the CCU will power its integral 2 KHz sounder.

Head, Side and Tail Lamps - USA|Page 6290 > < Head, Side and Tail Lamps - USA