landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Head, Side and Tail Lamps|Page 6479 > < Head, Side and Tail Lamps|Page 6477
Page 1
background image

Tail Lamp: Description and Operation
Head, Side and Tail Lamps - Canada

Description

DESCRIPTION

General

Daylight running lamps are fitted to Canadian specification vehicles only. The following lamps will operate when the engine is running, irrespective of
lighting switch position.

NOTE:  Daylight running lamps are extinguished when the vehicle is in 'Park'.

^

Headlamps (dipped beam only)

^

Side lamps

^

Tail lamps

^

Side marker lamps

^

Number plate lamps.

NOTE:  Instrument illumination is not operational until the lighting switch is moved to the side or headlamp position.

Operation

OPERATION

General

Feed from the positive battery terminal (C0192) is supplied to fusible link 3, fusible link 9, and fusible link 12 (C0632) on an R wire. Fusible link 12
(C0575) provides a constant battery feed to the lighting switch (C0041) and the daylight running relay (C0212) on an RN wire. A second constant
battery feed is provided by fusible link 12 (C0570) to the lighting switch (C0041) and the daylight running relay (C0212) on a UN wire.

Fusible link 9 (C0570) provides a constant battery feed to the headlamp main/dipped beam relay (C0587) on an N wire. The headlamp main/dipped
beam relay is located in the passenger compartment fuse box.

Fusible link 3 (C0571) is connected to the ignition switch (C0028) by an N wire. When the ignition switch is turned to the 'ignition' position, current
flows across the switch (C0028) to fuse 1 of the passenger compartment fuse box (C0588) on an NW wire. Fuse 1 (C0588) provides an ignition feed to
the daylight running relay (C0212) on a GR wire.

The ignition switch (C0028) also provides a feed to fuse 8 of the passenger compartment fuse box (C0588) on a G wire. Fuse 8 provides an ignition feed
to the Central Control Unit (CCU) (C0593), which is mounted directly onto the rear of the passenger compartment fuse box.

Side Lamps

When the lighting switch is turned to the side lamp position, current flows across the switch (C0041) to the daylight running relay (C0212) on an RW
wire. Current flows through the daylight running relay (C0212) to fuse 16 and fuse 28 of the passenger compartment fuse box (C0587) on an R wire.
Fuse 16 (C0582) provides a feed to the following on RO wires:

^

The RH side lamp (C0011).

^

The RH front side marker lamp (C0916).

Fuse 16 (C0583) also provides a feed to the following on RO wires:

^

The RH tail lamp (C0125).

^

The RH rear side marker lamp (C0918).

^

The rear number plate lamp (C0138).

^

The trailer pick-up (C0499).

All are earthed on B wires except the trailer pick-up, which is earthed on a W then B wire. Fuse 28 (C0581) provides a feed to the following on RB
wires:

^

The LH side lamp (C0009).

^

The LH front side marker lamp (C0917).

Fuse 28 (C0583) also provides a feed to the following on RB wires:

^

The LH tail lamp (C0121).

Head, Side and Tail Lamps|Page 6479 > < Head, Side and Tail Lamps|Page 6477