Freelander (LN) V6-2.5L (2004)
Throttle Position Sensor: Service and Repair
Sensor - Throttle Position (TP)
Sensor - Throttle Position (TP)
Service Repair No - 18.30.17
Remove
1. Disconnect battery earth lead.
2. Remove acoustic cover.
3. Disconnect multiplug from TP sensor.
4. Remove and discard 2 Torx screws and wave washers securing TP sensor to inlet manifold.
5. Remove TP sensor specification plate.
6. Pull TP sensor from throttle spindle.
CAUTION: Do not twist or apply leverage to throttle position sensor.
Refit
1. Clean mating faces of throttle housing and TP sensor.