Freelander (LN) V6-2.5L (2004)
Braking Sensor/Switch: Service and Repair
Sensor - Brake Pedal Position
Service Repair No - 70.35.44
Remove
1. Release bayonet fitting on brake light switch and remove switch.
2. Release sensor from mounting bracket.
3. Disconnect sensor multiplug and remove sensor.
4. Remove sensor mounting from bracket.
Refit
1. Position sensor to mounting bracket and connect multiplug.
2. Position switch and secure bayonet fitting.
3. Hold brake pedal depressed and push sensor fully into bracket, release pedal slowly to set sensor position.