Freelander (LN) V6-2.5L (2004)
/v6-2.5l/Page-1430001.png)
Wheel Bearing: Service and Repair
Front
Bearing - Hub
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Remove road wheel.
3. Release stake in drive shaft nut.
4. With an assistant applying brakes, remove and discard drive shaft hub nut.
5. Remove clip securing RH brake hose to support bracket, release hose from bracket. Release ABS sensor and pad wear sensor harnesses from
bracket.
6. Remove 2 bolts securing brake caliper to hub. Release caliper from hub and tie aside.
CAUTION: Do not allow caliper to hang on brake hose.
