Freelander (LN) V6-2.5L (2004)
17. Clamp both halves of a suitable bearing separator around inner track ensuring that inner lip fits in groove on inner track.
NOTE: From 2002MY the groove in the inner track was deleted. To remove the inner track, clamp the separator around the bearing inner track
surface.
18. Using tool LRT-99-500 and thrust pad LRT-54-014 withdraw inner track from drive flange.
19. Fit hub to vice and remove 4 bolts securing backplate to hub.
20. Remove backplate.
21. Remove circlip from bearing.