Freelander (LN) V6-2.5L (2004)
surface.
21. Using tool LRT-99-500 and thrust pad LRT-54-014 withdraw inner track from drive flange.
22. Remove circlip from bearing.
23. Position hub to press and press out bearing using tool LRT-54-015 and LRT-54-017, discard bearing.
CAUTION: Never re-use existing bearing.
Refit
1. Clean hub and drive flange.
2. Support hub on tool LRT-54-016 and press in new bearing using LRT-54-015.
3. Fit circlip to hub.
4. Fit brake disc shield, fit bolts and tighten to 8.5 Nm (6.5 ft. lbs.).