L322 Range Rover System Description and Operation
ENTERTAINMENT AND INFORMATION SYSTEMS
DESCRIPTION AND OPERATION 86-8-55
Destination Guide
Press the right-hand rotary control to start destination guidance. While the navigation computer is calculating the route
to the destination, the distance and direction to the destination as the crow flies are displayed at the top right hand
corner of the screen.
Once the route has been calculated, the destination address that has been entered appears at the top left hand corner
of the screen. The name of the road which the arrow instructs you to turn into is shown below it, together with the
distance to the junction with that road. A change of direction is likewise indicated by the spoken instructions.
The distance to the next turning is shown at the top right hand corner of the screen. An arrow indicates the direction
of the chosen destination as the crow flies. Your current position is shown at the bottom left: hand corner of the screen.
Should the area travelling through not be fully covered by the map CD, the arrow will display the direction in which the
driver should be travelling.
To repeat an audible instruction use the rotary controller to highlight the “instruction” button and press.
Once programmed with a route it is not necessary for the display to stay on the navigation system. The radio, cassette
or CD player can all be used. The navigation display and audible guidance will warn the driver prior to the next
junction/direction change.
Route Display
Selection of the route display option will call up the route display screen. This screen displays a map view of the route
to be driven along with an icon on the route show the vehicles current position on the route.
Navigation System Diagnostics
Information can be accessed through the diagnostic line using TestBook/T4. Information which can be accessed
includes the following:
l
Land Rover part number
l
Hardware and software version
l
Week and year of manufacture
l
LCD brightness
l
Read error memory/fault codes.
The button status function can be used to determine the correct functioning of the switch-pack. Sticking buttons can
be observed on the TestBook/T4 screen as well as the correct functioning of all the keys as they are pressed.
R o a d :
TMC
3 0 . 0 7 . 2 0 0 1
1 4 : 1 0
M o n d a y
UNITED KINGDOM
INPUT DESTINATION
D e l e t e
d e s t i n a t i o n
O n m a i n r o u t e
T r a f f i c i
D e s t . G u i
I n f o r m a t i o n
GAYDON
H4136
H4206
R o u t e m a p
300 yd
TMC
3 0 . 0 7 . 2 0 0 1
1 4 : 1 0
L E A M I N G T O N S P A
2 . 0 m l s
M o n d a y
N e w r o u t e
I n f o r m a t i o n
I n s t r u c t i o n
D e s t . I n p u t
C H U R C H S T .
A 4 5 2 , W A R W I C K
A 4 5 2