L322 Range Rover Service Procedures
GENERAL DATA
04-1
GENERAL DATA
Engine - Td6
General
Type
3.0 litre in-line direct injection diesel, 4 valves per cylinder, turbocharged
and intercooled
Cylinder arrangement
6 in-line, No. 1 cylinder at front of engine
Bore
84.00 mm (3.307 in)
Stroke
88.00 mm (3.465 in)
Capacity
2924 cm
3
(178.4 in
3
)
Firing order
1 - 5 - 3 - 6 - 2 - 4
Compression ratio
19.0 : 1
Direction of rotation
Clockwise viewed from the front of the engine
Maximum power
130 Kw (172 bhp) @ 4000 rev/min
Dimensions:
⇒
Length
778 mm (30.6 in)
⇒
Width
676.6 mm (26.6 in)
⇒
Height
800.3 mm (31.5 in)
Fuel injection system
Type
Common rail, direct injection fed by Bosch high pressure delivery pump
Maximum governed speed
4750 rev/min
Idle speed
790
±
50 rev/min
Glow plugs
6 – 1 per cylinder, positioned centrally in portion inlet side.
Turbocharger
Garrett GT 2256V
Emissions standard
EU3 - Class N1, Group 3
Valve timing
Inlet valves:
⇒
Opens
8
°
BTDC
⇒
Closes
28
°
ABDC
Exhaust valves:
⇒
Opens
36
°
BBDC
⇒
Closes
4
°
ATDC
Lubrication
Type
Wet sump, pressure fed
Oil pump type
Crankshaft driven, eccentric rotor
Pump outer rotor to body clearance
0.080 to 0.156 mm (0.0031 to 0.062 in)
Filter type
Disposable canister with full flow by-pass
Relief valve opening pressure
4.2 bar (60.9 lbf.in
2
)
Low oil pressure switch opening pressure
0.2 to 0.6 bar (3.0 to 8.8 lbf.in
2
)
Minimum oil pressure at idle
Oil pressure at 3500 rev/min
Maximum regulated oil pressure
0.5 bar (7.0 lbf.in
2
)
Not less than 3.0 bar (43.5 lbf.in
2
)
4.2
±
0.5 bar (61
±
7.0 lbf.in
2
)
Cylinder head
Type
Aluminium alloy, gravity die casting
Port configuration
Cross flow
Maximum warp
0.03 mm (0.001 in)
