L322 Range Rover Service Procedures
HEATING AND VENTILATION
REPAIRS
80-1
HEATING AND VENTILATION
REPAIRS
Controls - heater (ECU)
$% 80.10.02
On high line models the automatic temperature
control (ATC) ECU is an integral part of the heater
controls.
If the ECU is to be replaced then Testbook/T4 must
be connected and correct procedures adhered to,
prior to battery disconnection.
Remove
1. Remove LH centre console footwell closing
Closing panel - centre console.
2. Remove RH centre console footwell closing
panel.
3. Carefully release 4 clips securing heater
controls to carrier, disconnect 5 multiplugs and
remove.
Refit
1. Position heater controls to carrier and connect
multiplugs.
2. Fit and secure heater controls to carrier.
3. Fit centre console footwell closing panels.
