landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Body - Roof Opening Panel Misaligned/Jammed|Page 5537 > < Recall - Potential Roof Opening Panel Separation|Page 5531
Page 1
background image

Sunroof / Moonroof Panel: All Technical Service Bulletins
Body - Roof Opening Panel Misaligned/Jammed

No.: LTB00117

Issue: 1

Date: 20 Mar 2008

SECTION: 501

Roof Opening Panel Misaligned / Jammed - Repair Procedure

AFFECTED VEHICLE RANGE:
LR2 (LF)

VIN: 8H000212 - Onwards
Model Year: 2008 - Onwards

CONDITION SUMMARY:

Situation: 

The roof opening panel may be misaligned or jammed. This could be caused by the roof opening panel guide(s) being broken.

Action: 

In the event of a customer concern of the above issue, install new roof opening panel guides by following the Repair Procedure outlined below.

PARTS

TOOLS:

No special tools required

WARRANTY

REPAIR PROCEDURE

REMOVING ROOF OPENING PANEL GUIDES

NOTE:

Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > LF - LR2 > Service Information > Model Year >
Workshop Manuals: 5: Body and Paint > 501-17 Roof Opening Panel: Removal and Installation

1.

Refer to Workshop Manual (GTR) section 501-17 and remove the roof opening panel glass for access only (steps 1-5).

CAUTION:

Take care while removing the roof opening panel guides as damage to the glass panel guides can occur.

Body - Roof Opening Panel Misaligned/Jammed|Page 5537 > < Recall - Potential Roof Opening Panel Separation|Page 5531