LR2 (LF) L6-3.2L (2008)
Timing Chain: Service and Repair
Timing Chain
Service Repair No - 12.65.13
Special Service Tools
Removal
CAUTION: Extreme cleanliness must be exercised when handling these components.
NOTE: Make sure the timing chain free length is on the tensioner run of the chain before releasing the tensioner locking device.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the cover and disconnect the battery ground cable.
3. Remove the crankshaft front oil seal.
4. Remove the RH engine mount.
5. Remove the timing cover.
6. Position and lock the crankshaft.
Special Service Tools: Locking Tool, Crankshaft
7. To depress the chain tensioner piston and lock it in position with a 2mm, or less, diameter pin.