LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1356003.png)
14. Install the special tool guide to the blower motor.
15. With the marking upwards, use the guide to install the remainder of the special tool to the blower motor.
CAUTION: Make sure that the special tool is correctly located.
Rotate the special tool counter-clockwise to release the blower motor assembly.
16. Remove the blower motor assembly.
Installation
1. Using the special tool, install the blower motor assembly approximately 10 degrees counter-clockwise from the vertical position.
2. Rotate the special tool clockwise to secure the blower motor assembly.
