LR2 (LF) L6-3.2L (2008)
Refrigerant Pressure Sensor / Switch: Service and Repair
Air Conditioning (A/C) Pressure Transducer
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Remove the plenum chamber.
CAUTION:
^
Extreme cleanliness must be exercised when handling these components.
^
Make sure that all openings are sealed. Use new blanking caps.
NOTE: Use an additional wrench to prevent the component from rotating.
2. Torque: 8 Nm
Installation
1. To install, reverse the removal procedure.