LR2 (LF) L6-3.2L (2008)
Air Bag: All Technical Service Bulletins
Interior/Restraints - Driver Air Bag Trim Uneven
No: LTB00203
Issue: 1
Date: 12 MAY 2009
SECTION: 501
Driver Air Bag Module Trim Cover Distorted - Repair Procedure
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
The driver air bag module trim cover may 'lift up' at the top edge. This cosmetic issue may be caused by an expansion coefficient difference between the
two layers of material that form the airbag module trim cover.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to replace the driver air bag module.
PARTS
TOOLS:
Refer to Workshop Manual (GTR) for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer
to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
REPLACE DRIVER AIR BAG MODULE
NOTE: