LR2 (LF) L6-3.2L (2008)
Torque:
270 Nm
Tighten the rear halfshaft nut.
Torque:
Stage 1. 330 Nm
Stage 2. 30 Degrees
Stake the hub nut.
26. Adjust the parking brake.
27. Install the wheel and tire.
Wheel Knuckle Rear Bushing
Wheel Knuckle Rear Bushing
Service Repair No - 64.15.11
Special Service Tools
Removal
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the wheel and tire.
3. Remove the trailing arm.
4. CAUTION: Mark the components to aid installation.
Remove the bushing.
Special Service Tools: Hydraulic Cylinder 10t
Special Service Tools: Remover/Installer, Wheel Knuckle Bushing
Special Service Tools: Remover, Wheel Knuckle Bushing