LR2 (LF) L6-3.2L (2008)
Rear Door Window Glass: Service and Repair
Rear Door Fixed Window Glass
Rear Door Fixed Window Glass
Removal
1. Lower the door glass to the bottom of the door.
2. Disconnect the battery ground cable.
3. Remove the rear door trim panel.
4. Remove the rear door frame trim.
5. Remove the 2 nuts.
Remove the 2 Torx screws.
Release the glass channel lining.
Installation
1. Install the rear door window fixed glass and tighten the nuts and Torx screws evenly.
Torque: 5 Nm
2. Install the door frame trim.
3. Install the rear door trim panel.
4. Connect the battery ground cable.