LR3/Disco 3
Axle Assembly (54.10.01)
Removal
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the front wheels and tires.
3 .
Remove the LH halfshaft. For additional information, refer to
Halfshaft LH (47.10.01)
(Section 205-
04)
4 .
Remove the axle tube. For additional information, refer to
Axle Tube (47.10.42)
(Section 205-03)
5 .
Remove the front axle crossmember.
Remove the 4 bolts.
6 .
CAUTION: Mark the position of the driveshaft flange in relation to the drive pinion flange.
CAUTION: To avoid damage to the joint or gaiter, do not allow the driveshaft to hang.
Release the driveshaft from the front axle drive flange.
Remove the 6 Torx bolts and washers, discard the bolts.
7 .