LR3/Disco 3
2 .
Install the CV joint boot.
3 .
Install the outer CV joint.
Install the snap ring.
Position the CV joint on the halfshaft, press the snap ring into it's groove and push the CV
joint fully on to the halfshaft.
Pull on the CV joint to ensure the snap ring has fully engaged.
4 .
Pack the CV joint with the grease supplied.
5 .
Install the CV joint boot to the CV joint.
Secure with the new clamps.
6 .
Install the halfshaft. For additional information, refer to
Halfshaft (47.11.01)
(Section 205-05)
7 .
Install the wheel and tire.
Tighten the wheel nuts to 140 Nm (103 lb.ft).