Removing 44L Engine Wiring Harness on LR3/Disco 3
Engine Wiring Harness - 4.4L (86.70.17)
Removal
Published : Jul 21, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the engine undershield. For additional information, refer to
Engine Undershield (76.10.50)
(Section 501-02)
3 .
Remove the radiator access panel.
Remove the 4 bolts.
4 .
Remove the engine cover. For additional information, refer to
Engine Cover - 4.4L (12.30.50)
(Section 501-05)
5 .
Remove the battery. For additional information, refer to
Battery (86.15.01)
(Section 414-01)
6 .
Remove the engine compartment upper heat shield.
Remove the screw.
Release the 2 mounting clips.
7 .
Remove the engine compartment fuse box main feed cable.
Remove the bolt.
